Briggs and Stratton is the generator brand we recommend the most here at A&J Generator & Equipment. This brand is known for its reliability, performance, and durability. You may have one of the Briggs & Stratton generator models in your home or commercial building now. However, this generator may have some issues that prevent them from operating normally. In some cases, you will notice certain warning error signs from your generator.
The engine of the generator may not function well, so you cannot start the unit. There are some factors that will cause this error in your generator unit. You need to be aware of some of these factors, so you can hire the best generator experts with specific skills and knowledge in solving any of these errors.
Common Warning Errors on the Briggs and Stratton Generators
Clogged Carburetor
When your generator is turned off and you cannot start the engine, you may have problems with the carburetor. This part of your generator may be clogged because fuel has been left in the generator for a long time.
After a few weeks, some ingredients of the fuel will evaporate. Therefore, the fuel will leave a thick and sticky substance on the carburetor. This sticky material will clog up the carburetor, so it will prevent the engine of your generator from starting.
Damaged Spark Plug
When the porcelain insulator is cracked, the electrode will be damaged or burned away. As a result, it may affect the performance of your generator. In most damaged spark plug cases, you will be unable to start the engine of your generator.
For finding out if the spark plug is damaged, you can consider using the spark plug tester. If there is no spark on this part of your generator, you may need to consider replacing the spark plug. Each type of generator has its own unique spark plug. You can contact your favorite generator experts to ask about your unit.
Failed Ignition Coil
The ignition coil will send voltage to your generator via the spark plug inside this unit. When the ignition coil is damaged, the engine may have difficulties starting.
A failed ignition coil should be replaced immediately, so it will never affect the overall performance of the generator.
Problems with the start switch
This is another common problem that may occur on your Briggs & Stratton generators. When the start switch has some problems in your generator, you may have difficulties in turning on your generator.
Pros use a multimeter for testing this switch on your generator. This testing procedure is there to ensure that you can use this switch or tell if you need to replace this part. Replacing this switch is not an easy task to do.
Call the Generator Pros
When you get any of these issues, you should avoid fixing any of those problems alone. Hire professional experts who have the necessary experience in solving these issues. We will follow all guidelines from Briggs & Stratton, so you will never have to worry about damage to your generator. If you care about your generator and backup power and you want to use it for a long time, call A&J today.
